Coordinate Measuring Machine
Selected tag
Tag Selection
- Coordinate Measuring Machine (44)
- Coord3 (4)
- CMM MACHINE MALAYSIA (8)
- CNC CMM MACHINE (44)
- CMM MACHINE (11)
- Renishaw (42)
- Measuring Equipment (8)
- Manual CMM (3)
- USED CMM MACHINE (3)
- CNC CMM (8)
- Manual Probe Head (6)
- RTP20 (1)
- Renishaw Probe (2)
- Motorised Probe Head (2)
- Controller (4)
- Amplifier (2)
- Joystick (3)
- Rack System (9)
- Probe Interface (3)
- M3 Styli (1)
- M4 Styli (1)
- M5 Styli (1)
Coord3 CMM Machine
GENERAL CHARACTERISTICS
BENCHMARK CMM Machine is available in two manual or CNC configurations. Manual machines can be upgraded to the full CNC version later on-site, offering the possibility of a two-phase investment.
More Details...
GENERAL FEATURES ARES is available in 500 mm and 700 mm deck width versions and undoubtedly stands out as the ideal CMM for workshops.
More Details...
FEATURES AND BENEFITS
- Ultra-rigid mechanical structure for maximum accuracy in scanning
- Highly responsive structure to environmental temperature changes
- CAD FEA-assisted design of the extruded aluminum alloy crossmember to minimize inertial effects at maximum dynamics
- Monolithic granite support surface with
More Details...
GENERAL FEATURES
The KRONOS series is also available in NT version, equipped with the innovative Silicon Carbide spindle for even higher metrological performance.
More Details...
PI 200-3
A dedicated interface unit which powers and services the TP200 probe, standard touch-trigger probes and up to two SCR200 stylus changing racks.
The PI 200-3 interface is a dual purpose interface designed to process signals from the TP200 strain gauge probe and the TP20 / TP2 / TP6 touch-trigger probes.
More Details...
PI 7-3
The PI 7-3 interface is a dual purpose interface designed to process signals from the TP7M strain gauge probe and standard touch-trigger probes.
Special auto-selecting electronics within the interface allow exchange of these probes without any changes to the interface.
It supports TP7M and TP2, TP6, TP6A and TP20 probes.
More Details...
IS1-2
The IS1-2 interface selector is a fully automatic system for use on CMM installations requiring multiple sensor types.
More Details...
MCR20 and MCR20-R
Module change racks enabling automated changing of TP20 stylus modules.
The MCR20 module changing racks are passive and can store up to six TP20 probe modules for automatic changing under measurement program control.
More Details...
TCR20 and TCR20-R
Module racks for use with PH20 providing quick and repeatable tool changing and tip correction.
The TCR20 racks securely store modules for rapid automatic changing, protecting mating surfaces from any airborne contaminants within the working envelope of the machine.
More Details...
SCR200 and SCR200-R
Change racks for TP200 stylus modules.
The SCR200 racks provide automatic, high speed changing between up to six TP200 stylus modules and are powered by the separate probe interface PI 200-3, providing features to facilitate safe stylus changing.
More Details...
SCR600
Change rack for SP600 stylus modules.
The SCR600 is a passive stylus change rack and so it requires no electrical connections. It is protected from overtravel (in the probe entry direction) by a mechanism in the base which can be manually reset.
More Details...
FCR25
Flexible change racks for automated changing of SP25M scanning and touch-trigger modules.
A range of module changing systems, each of which allows any of the SP25M system elements to be stored in each port.
More Details...
ACR1
An eight port, fully integrated CMM probe or extension bar exchange system.
Mounted within the CMMs working envelope, the ACR1 autochanger enables fast, automatic probe exchange without the need for requalification. The probe head docks one probe and picks up another using the highly repeatable autojoint.
More Details...
ACR3
The ACR3 provides a passive means to automatically exchange probes without the need for requalification.
ACR3 uses Renishaw's unique autojoint connector to attach probes and extensions to the PH10M PLUS and PH10MQ PLUS motorised indexing heads. It can support a range of sensors from Renishaw and other metrology suppliers.
More Details...
MRS modular rack system
A flexible platform allows you to combine probe and stylus changing for optimum CMM functionality.
The MRS modular rack system provides a platform for Renishaw probe and stylus changing racks.
More Details...
MRS2 modular rack system
The MRS2 modular rack system is a versatile probe and stylus changing solution for Renishaw sensors.
MRS2 is available in a variety of leg and rail lengths to allow it to be configured to various applications.
More Details...
MCU W-2
The wireless manual control unit (MCU W-2) is a comprehensive joystick designed for use with Renishaw's range of UCC controllers.
Based on the MCU5-2 joystick design, the MCU W-2 uses modern battery technology and Bluetooth® radio modules to provide an effective wireless joystick with a maximum of 25 m range and over eight hours between battery changes.
More Details...
MCU5-2
The MCU5-2 is a development of the MCU5 joystick, with new buttons and new functionality.
The manual control unit is a comprehensive CMM joystick controller designed for use with Renishaw's range of UCC controllers
It includes the functionality of both the Renishaw standard UCC joystick interface and Renishaw PHC10 hand control unit (HCU1).
More Details...
SPA2-2
The SPA2 is a 4-channel digital servo power amplifier with an integral power supply.
SPA2-2 has been optimised to work with the UCC range CMM controller and MCU5-2 joystick, together forming an ideal retrofit package.
More Details...
SPA3-2
Servo power amplifier with support for absolute BiSS readheads, enhanced machine I/O and up to four axes of position feedback for dual Y scale machines.
The SPA3-2 is a 3-axis dc servo power amplifier with enhanced machine I/O, support for absolute BiSS readheads and category 2 E-STOP.
More Details...